Colors: RGBAW Philips Lumileds

CRI: 92

Total LED power: 45W

Luminous Flux: 1340Lm

Emittance (@2m): 4800Lx

Strobe:  0-25Hz

Beam Angle: 13 ˚

Pixels: 1

Battery: LG Chem Lithium-ion

Battery Lifetime: 70% after 300 cycles

Battery Runtime: Up to 20 hours

Charging time (nominal): 5 Hours

Input Voltage: 90-260V 50-60Hz

Wireless Modules: 865-870MHz | 902-928MHz | 2.4GHz

Range: 300m | 330 Yards

Wired DMX: not supported

Wireless DMX: CRMX & others, excluding W-DMX G5, City Theatrical

Housing: Aluminum

IP Rating: IP65

Relative humidity: 0-100%

Ambient Temperature: 0-40˚C | 32-104˚F

Weight: 3.40kg |7.5Lbs

Dimensions: 145 x 190 x 221 (mm)

Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.

Set the length of your event and be sure that your lights won’t run out while still getting the maximum brightness.

100% color consistency through any batch. It can hit exact color temperatures and reproduce standard filter gels.

Scrambled PWM technology to avoid flickering when filming, green/magenta balance to minimize post-production work.

The lights give visual and audible alarm and send notification to the AsteraApp if they are being moved during an event.

Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.

Switch lights into power-saving standby and schedule them to wake up when the event starts.

The dynamic power-boost feature enables the light to display the maximum brightness at all times and intensify non-white colors.

Switches automatically to white light and runs of its battery when AC power is cut off.